Mubychem Group, established in 1976, is the pioneer manufacturer of Ammonium Chloride, Zinc Chloride etc. It has (FDA) GMP approval, ISO-9001-2008 Certificate, "REACH" Pre-registration, ISO-22000:2005 HACCP, Kosher Certificate and Halal Certificate.
Click Here to Bookmark this Web Site
Email This Page Info to a Friend or a Colleague
--------
--------
CALCIUM CHLORIDE
GENERAL SPECIFICATIONS
CAS No.: 10043-52-4
Molecular Weight: 110.98
Chemical Formula: CaCl2
Specifications and Grades of Calcium Chloride
|
Calcium Chloride Fused; Hard Solid |
Calcium Chloride Double Fused; Porous |
Calcium Chloride Anhydrous |
|
Calcium Chloride Fused 72-75% Assay |
Calcium Chloride Porous Fused 80% Assay |
Calcium Chloride Anhydrous 94-98% Assay |
|
Appearance White Lumps |
Appearance White Lumps or Powder |
Appearance White Lumps or Powder |
|
Magnesium 0.3% max. |
Magnesium 0.3% max. |
Magnesium 0.3% max. |
|
Iron 100 ppm max. |
Iron 100 ppm max. |
Iron 100 ppm max. |
|
Dry Basis Assay 98% min. |
Dry Basis Assay 98% min. |
Dry Basis Assay 98% min. |
|
In 50 Kgs. HDPE bag with HMHDP liner. |
In 50 Kgs. HDPE bag with HMHDP liners |
In 50 Kgs. HDPE bag with HMHDP liners |
|
Particulars |
Calcium Chloride Anhydrous |
Calcium Chloride Dihydrate |
|
Assay |
93% min. CaCl2 Calcium Chloride Anhydrous |
97 to 103% as CaCl2.2H2O Di-hydrate |
|
Arsenic |
0.0003% max. 3 ppm. max. |
0.0003% max. <3 ppm |
|
Lead (Pb) |
0.001% max. 10 ppm. max. |
0.001% max. <10 ppm. |
|
Heavy Metal as (Pb) |
0.0003% max. 3 ppm. max. |
0.0003% max. <3 ppm. |
|
Magnesium/Alkali |
1% max |
1% max. |
|
Clarity of 10% Soln. |
Clear & Colourless |
Clear & Colourless |
|
Free Acid or Alkali |
0.005%max. & pH 4.5-9 0.2ml of 0.01M HCl/NaOH to 10ml of 10% |
0.005%max. & pH 4.5-9 0.2ml of 0.01M HCl/NaOH to 10ml of 10% |
|
Passes Standards of |
Food Grade. |
IP Std. |
Calcium Chloride Dihydrate & A.R. Grade
|
CaCl2.2H2O EXTRA PURE; A. R. MERCK SPECIFICATIONS. |
|
|
Assay Calcium Chloride Dihydrate CaCl2.2H2O |
97%-103%. as CaCl2.2H2O Calcium Chloride Dihydrate |
|
Free Acid or Alkali |
0.005% Max. as HCl OR Ca(OH)2. |
|
Sulphate (SO4) |
0.01% Max. |
|
Iron |
0.001% Max. |
|
Magnesium |
0.05% Max. |
Calcium Chloride USP
Calcium Chloride, Dihydrate. USPCaCl2·2H2O 147.01
Assay— Calcium
Chloride contains an amount of CaCl2 equivalent to not less than 99.0
percent and not more than 107.0 percent of CaCl2·2H2O.
Packaging and storage— Preserve in tight containers.
Labeling— Where
Calcium Chloride is intended for use in hem dialysis, it is so labeled.
Identification— A
solution (1 in 10) responds to the tests for Calcium and for Chloride.
pH: between 4.5 and
9.2, in a solution (1 in 20).
Aluminum (where it
is labeled as intended for use in hem dialysis)— the limit is 1 4g per g.
Iron, aluminum, and
phosphate— To a solution (1 in 20) add 2 drops of 3 N hydrochloric acid
and 1 drop of phenolphthalein TS. Then add ammonium chloride–ammonium
hydroxide TS, drop wise, until the solution is faintly pink, add 2 drops in
excess, and heat the liquid to boiling: no turbidity or precipitate is
produced.
Heavy metals— the
limit is 0.001%.
Limit of magnesium and
alkali salts— Dissolve 1 g in about 50 mL of water, add 500 mg of
ammonium chloride, and proceed as directed in the test for Limit of
magnesium and alkali salts under Calcium Carbonate, beginning
with “heat the solution, and boil for 1 minute”: the weight of the residue
does not exceed 5 mg (1.0%).
Organic volatile
impurities meets the requirements.
Calcium Chloride BP Dihydrate Specifications
Calcium Chloride BP DihydrateCaCl2,2H2O
DEFINITION
Content
97.0 per cent to 103.0 per cent of CaCl2,2H2O.
CHARACTERS
Appearance
White or almost white, crystalline powder, hygroscopic.
Solubility
Freely soluble in water, soluble in ethanol (96 per cent).
IDENTIFICATION
Solution S (see Tests) gives reaction
of chlorides.
It gives the reactions of calcium.
It complies with the limits of the
assay.
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water
prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and not more intensely coloured than reference
solution.
Acidity or alkalinity: To 10 ml of freshly prepared solution S add 0.1 ml of
phenolphthalein
solution. If the solution is red, not more than 0.2 ml of 0.01 M hydrochloric acid
is
required to discharge the colour and if the solution is colourless, not more
than 0.2 ml of 0.01 M sodium hydroxide is required to turn it red.
Sulphates: Maximum 300 ppm.
Aluminium: To 10 ml of solution S add 2 ml of ammonium chloride solution R
and 1
ml of dilute ammonia and boil the solution. No turbidity or
precipitate is formed.
If intended for use in the manufacture of dialysis solutions, the above test
is replaced by the test for aluminium maximum 1 ppm.
Barium: To 10 ml of solution S add 1 ml of calcium sulphate solution R .
After at least 15 min, any opalescence in the solution is not more intense
than that in a mixture of 1 ml of distilled water and 10 ml of
solution S.
Iron: Maximum 10 ppm, determined on solution S.
Magnesium and alkali metals: Maximum 0.5 per cent.
Heavy metals: Maximum 20 ppm.
We offer Calcium Chloride IP, BP, USP or EP made at our FDA approved world class plant Anmol Chemicals an ISO-9001-2008 Certified Company using standard GMP techniques
For an exhaustive Write-up on the product Manufacture, Specifications, Uses, Applications, MSDS etc. you may visit Calcium Chloride BP USP IP ACS AR & Food Grade
For more contact Calcium Chloride manufacturers at:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD,
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE)
91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264
e-mail: info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright
and Usual Disclaimer
is Applicable
Last updated:
06 January, 2012.
----------------
| Old Spice: Manufacturing since more than Three Decades: | |||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride Manufacturers | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide Pellets | Sodium Thiosulfate | |
| Zinc Chloride |
Zinc Chloride Manufacturers Zinc Chloride Anhydrous Solution |
||
University of Phase Change Material
ZnCl2 --- Ammonium Chloride --- Calcium Chloride --- Potassium Chloride --- Sodium Acetate
Ammonium Chloride --- Calcium Chloride --- Potassium Chloride --- Sodium Acetate
Exports to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Brazil Chile Argentina Dubai etc.